IS1001 MTS Multiplexing Transceiver System

 

Biomark’s Multiplexing Transceiver System (IS1001-MTS) is our newest stationary reader; providing decoding of ISO 11784/11785 compliant FDX-B & HDX PIT tags. The MTS provides improved performance, with respect to detection range and number of antennas, over it’s predecessor, the FS1001M stationary reader. The MTS consists of a Master Controller (IS1001-MC) and up to 12 Nodes (IS1001 reader boards). The IS1001-MC acts as the command, control and data collection center for the system, directing each IS1001 when to activate its antenna and storing decoded tag IDs and diagnostic information. The MTS is scalable. The scalable approach of the MTS offers a cost effective solution for monitoring a single location and the expandability to sample up to 12 locations or over 24 locations when synchronized with another MTS systems. A single IS1001 reader can be used as a standalone unit or synchronized with one more IS1001, for continuous monitoring without the need for an IS1001-MC.

 

IS1001 Antenna Control Node Specifications

 

Input Voltage

Model IS1001: 18-28 V DC. Model IS1001-12V: 10-15 V DC

Input Fuse

3A, Resettable

Reverse Polarity Protection

Yes

Under Voltage Protection

Yes

Over Voltage Protection

Yes

In-Rush Current Limiting

Yes

Antenna Exciter Voltage

Model IS1001: 12-20 V DC, Electronically Adjustable, 5-Steps. Model IS1001-12V: Fixed to 10 V DC

Antenna Exciter Configuration

Full Bridge

Antenna Current Limit

11.0 Ap-p, Firmware Enforced

Antenna Tuning

10 Capacitors, Electronically Switched

Operating Frequency

134.2 KHz

Synchronization Capability

Antenna Exciter Clock Synchronization. Network Configuration. Hardwired Twisted-Pair Interface *

Tag Technologies Decoding

ISO FDX-B, ISO HDX

Virtual Tag Test

Detection Self-Diagnostic, Electronically Adjustable Level

Internal Data Storage

100,000 Tag IDs, 1,000 Status Reports *

External Data Storage

Up to 32Gb of real-time information on USB flash drive *  **

Communication Ports

USB (Mini-B); ASCII Protocol. Ethernet (RJ45); ASCII Protocol. Fiber Optics (ST); ASCII Protocol *  **

External Status LEDs

Power (Green). Tuned (Red). Scan (Yellow). Tag (White) **

Buzzer

Piezo Indicator, 4 KHz, 70 dB **

Operating Temp. Range

-4˚F to 158˚F (-20˚C to 70˚C)

Operating Humidity Range

10% to 90%, Non-Condensing

Weight & Dimensions

1.0 lbs. (0.45 kg) (w/o enclosure). 12.25”L  x 3.75”W x 2.00”H (31 cm x 9.5 cm x 5 cm) (w/o enclosure)

 

IS1001 Master Controller Specifications

 

Input Voltage

18-30 V DC (standard) or 10-15 V DC (optional); jumper-selectable

Input Fuse

4 A, Resettable

Reverse Polarity Protection

Yes

Undervoltage Protection

Yes

Overvoltage Protection

Yes

In-rush Current Limiting

Yes

Synchronization Capability

IS1001 Activation Synchronization, Chain Configuration, Hardwired Twisted-Pair Interface

Tag Technologies Supported

ISO FDX-B, ISO HDX

Virtual Tag Test

Detection Self-Diagnostic, Electronically Adjustable Level

Internal Data Storage

16MB of real-time information

External Data Storage

Up to 32GB of real-time information on USB flash drive

IS1001 Ports

Two, supporting up to 12 nodes

Communication Ports

USB (Mini-B); ASCII Protocol, Ethernet (RJ45); ASCII Protocol, Fiber Optics (ST); ASCII Protocol

External Status LEDs

Power On (Green), System Ready (Yellow), Tag Detected (Red)

Buzzer

Piezo Indicator, 4 KHz, 70 dB

Display

Graphical LCD, Backlit

Keypad

9 Keys, Content-Sensitive

Operating Temperature Range

-4˚F to 158˚F (-20˚C to 70˚C)

Operating Humidity Range

10% to 90%, Non-Condensing

Enclosure

NEMA 4x, IP66 Rated Steel Box

Weight

16.6 lbs. (7.5 kg)

Dimensions

21.0” L  x 8.0” W x 6.0” H (53.5 cm x 20.5 cm x 15.5 cm)

   

 

FS2020 Stationary Transceiver

 

A powerful, high speed ISO compliant stationary transceiver designed to replace current ageing single channel transceivers. This stationary reader has been enhanced with increased storage capacity (15,900 PIT Tag memory), programmable self-tuning capacitance to adapt to changing environmental conditions, improved noise filtering, ability to synchronize with other readers and multiple communication port options. Please call for more information.

 

 

 

Our team of customer service and technical support staff are dedicated to providing outstanding customer care.